UPM THM701 Guide d'installation télécharger pdf (Page 35)

Connecting the Wires to the Terminals

Connect the previously labeled wires to the corresponding

terminals, matching the designations. Use a screwdriver to

loosen the terminal, wrap the wires around the terminal then

tighten to securely fasten the wires. Make sure the

wires do not touch or short-circuit with other terminals.

Depending on your heating/cooling equipment, you may

need to connect between 2 to 7 wires to the thermostat.

If you have two ‘R’ wires, then connect each wire to its

corresponding terminal and remove the JUMPER between

the RC and RH terminals.

If you are unsure of the connections please consult a certified

electrician for the safe installation of your thermostat.

Wall

Through Hole

Wall

Wires

Back cover

Terminals

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Pas de commentaire

UPM THM701 Guide d'installation Page 35